Repair Manual

MANUAL GEARBOX
21
21 - 34
DIFFERENTIAL GEAR BEARINGS ADJUSTMENT ( G.B. 365 and 51 C )
The differential gear bearings adjustment is performed by means of the nuts (1) and (2).
Mount the annular oil seal rings on the adjustment nuts.
Grease the adjustment nuts threads with sealing paste LOCTITE 518
NOTE:
Before mounting, the annular oil rings will be immersed in oil 80W/90.
Mount the outer rings of the differential gear
bearing in the half crankcases so that they are
protruding as compared to the inner side of the
half crankcase.
Place the differential gear in the right side half
crankcase.
Place the left side half crankcase and
assemble it by means of screws.
Tighten the screw to the required
moment,observing the tightening order specified
in the drawing.
M 7 : 1,9 - 2,4 daNm
M 8 : 2,8 - 3,3 daNm
REPAIR
1
2
2
1
vnx.su