Repair Manual

MANUAL GEARBOX

21 - 38

Engage the velocity steps III - IV fork in the position required for the coupling of velocity

step IV and keep it in this position until complete mounting of the gearbox.

REMOUNTING OF THE REVERSE DRIVING PINION

Place the attachment spring and ball of the

shaft in the left side half crankcase.

NOTE:

The spring is black painted to be

different from locking spring of forks shafts.

Introduce the reverse driving pinion shaft

Mount :

- the reverse driving pinion, with the hub

directed towards the front of the gearbox;

- the friction washer, with the bronze side

towards the pinion.

Introduce the guiding wedge in its seat and

completely introduce the shaft.

Mount the safety ring.

REPAIR

vnx.su