Repair Manual

29
DRIVE SHAFTS
FRONT CROSS TRANSMISSION
D
ISMOUNTING
Mount the TF 509 support cross bar between the shock absorber attachment shaft and
the suspension lower arm shaft.
Lift the vehicle on the elevator.
Dismount the wheel.
Loosen:
- the attachment nut of the
suspension upper ball joint;
− the steering joint fixing nut.
Depress by means of the PF 476
extractor:
- the upper suspension ball joint;
- the steering ball joint.
Remove the attachment elastic pin
by means of the CV 31 B mandrel.
Stuck the hub by means of the
PF 235 A device and dismount:
- the transmission nut;
- the washer.
Dismount the brake caliper.
Dismount the suspension upper joint nut
and the steering joint nut
.
Take the suspension off the propeller
shaft pinion.
Tem porarily mount the steering ball
joint.
Remove the transmission from the
hub by means of the PF 235 A extractor.
Dismount the steering ball joint and
remove the transmission.
29 - 3
vnx.su