Repair Manual

GENERAL
30
THE DIMENSIONS OF MAIN BRAKING ELEMENTS
FRONT BRAKE
REAR BRAKE
TANDEM MASTER CYLINDER with
I.C.P. BY PASS ÎNCLUDED
Inner diameter
Max.pump stroke
BRAKE FLUID TANK
PRESSURE LIMITER
20,6
32
Double, with alarm sensor
For parallel circuit
30 - 7
Wheel braking cylinder diameter 25,4
New drum inner diameter 254
Maximum drum diameter after grinding 255
Braking lining width 50
Braking lining thickness 5
Minimal accepted braking lining height above rivets 0,5
Brake caliper bore diameter (for 3 screws wheel) φ 48
Brake caliper bore diameter (for 5 screws wheel) φ 54
Brake disk diameter 228
Disk thickness non aerated 10
Disk thickness aerated 20
Minimal disk thickness non aerate 9
Minimal disk thickness aerated 19
Braking pad thickness ( the support included) 14
Minimal brake pad thickness (the support included) 7
Disk axial run out measured at Φ 215 0,1
( in mm )
vnx.su