Repair Manual

GENERAL

II. FAILURE : LONG PEDAL

When braking, the brake pedal is slowly moving.

Perform a test with the stopped engine, after previously

performing five successive pushing on the brake pedal

(in order to vacuum the servobrake).

Locate and repair or replace the

item where a brake fluid leak is

established.

Ye s

Is the brake f lui d

level low er

compared to the

required one?

Replace the brake pump, because the pressure gas-

ket (sealing) between the primary circuit and the sec-

ondary circuit is defective.

STOP

DIAGNOSTIC

30 - 13

vnx.su