Repair Manual

VALUES AND SETTINGS

07 - 9

BRAKES

FRONT BRAKES

REAR BRAKE

MEIN BRAKE CYLINDER

* Brake fluid tank– double with level alarm.

∗ Pressure reducing valve for parallel circuit.

* Brake fluid as per norms SAE J 1703, DOT4.

Brake caliper bore diameter (for brake disk non aerated)

Brake caliper bore diameter (for aerated brake disk)

Disk thickness non aerated

Disk thickness aerated

Minimal disk thickness non aerated

Minimal disk thickness aerated

Brake pad thickness ( the support included)

Minimal brake pad thickness (the support included)

Disk axial run out, measured at Φ215 mm

Φ 48 mm

Φ 54 mm

10 mm

20 mm

9 mm

19 mm

14 mm

7 mm

0,1 mm

Wheel braking cylinder diameter

New drum diameter

Maximum drum diameter after grinding

Braking lining width

Braking lining thickness

Minimal accepted braking lining height above rivets

Φ 25,4 mm

Φ 254 mm

Φ 255 mm

50 mm

5 mm

0,5 mm

Type of main brake cylinder

Tandem master cylinder with ICP by

pass included

Inner diameter

Max. pump stroke

Φ 20,6 mm

32 mm

vnx.su