Repair Manual

31
FRONT BEARING ELEMENTS
31 - 3
CHECKING
SPECIAL TOOLS
DENOMINATION CODE
Front axle support cross bars PF 509
Ball joints extractor PF 476
Upper arm checking device PF 502
Dynamometric wrench MOT 50
Dismount the upper arm of the suspension.
Place the device on the arm and mount the shaft.
The arm should easily enter in the device central guiding and should be placed on one
of the support pins (1,2,3,4).
Measure the distance between the support pins and arm, which should be between
0 and 1 mm.
Re mount the suspension upper arm on the vehicle.
UPPER ARM
vnx.su