Repair Manual

31
FRONT BEARING ELEMENTS
31 - 7
R
EMOUNTING
Mount the lower ball joint in the steering knuckle and slightly tighten the nut.
Lift the half-front axle by means of a jack.
Position the arm, grease it with special MoS2 grease and mount it.
Mount the elastic bushings of the stabilizer rod.
Compress the front axle in the lock position of the elastic bushings, introducing the
PF 509 support cross bar between lower arm shaft and shock absorber shaft.
Tighten the following to the required moment :
- the lower ball joint nut;
- the lower arm shaft nut;
- the stabilizer rod elastic bushing nut.
Mount the wheel, take down the vehicle from the elevator and remove the PF 509 support
cross bar.
LOWER ARM
vnx.su