Repair Manual

FRONT BEARING ELEMENTS
31 - 8
31
CHECKING
SPECIAL TOOLS:
DENOMINATION CODE
Front axle support cross bar PF 509
Ball joint extractor PF 476
Lower arm checking device PF 502
Dynamometric wrench MOT 50
LOWER ARM
Dismount the suspension lower arm.
Mount the lower arm checking device PF 502 on the lower arm and introduce the shaft.
By means of the pin (D) placed on the arm, measure the distance between the pins
(A,B,C) and arm, which should be between 0 and 1 mm .
Mount the suspension lower arm on the vehicle.
vnx.su