Repair Manual

FRONT BEARING ELEMENTS
31 - 10
31
BALL JOINT REPLACEMENT
SPECIAL TOOLS:
DENOMINATION CODE
Front axle support cross bar PF 509
Ball joint extractor PF 476
Dynamometric wrench MOT 50
Release the ball joint by means of the
PF 476 extractor.
Dismount the suspension lower arm.
Bore and remove the ball joint attachment
rivets.
Mount the new ball joint and attach it with
screws, which shall have the head oriented
towards the bellows.
Mount the lower arm on the vehicle.
Check and adjust:
- the caster angle;
- the camber angle;
- the steering box position;
- the parallelism and repartition.
ELASTIC BUSHING, LOWER ARM BALL JOINT
vnx.su