Repair Manual

FRONT BEARING ELEMENTS
31 - 18
31
DISMOUNTING
Lift the vehicle on the elevator
Dismount :
- the wheel;
- the front wheel steering knuckle nut;
- the caliper without disconnecting the flexible connection;
- the brake pads;
- the caliper support.
Lock the hub by means the of the PF 235 A device and uns crew the steering knuckle nut.
Unscrew the three attachment screws of the hub disk, located at 120° one of another; mount
in their place the RO 482 – 01 extractor.
Place a screw near the attachment nut of the bearing closing plate and bring the three screws
in contact with the steering knuckle.
Alternatively tighten the three screws until dismounting the “ hub – disk “ assembly.
Dismount the disk off the hub.
BRAKE DISK
vnx.su