Repair Manual

31
FRONT BEARING ELEMENTS
31 - 19
R
EMOUNTING
Check the state of the flexible hose and of the brake pads; replace them if necessary.
Attach the disk to the hub.
Grease the bearing with LiCaPb type II grease.
Mount the cross bar on the hub and place the “hub – disk” assembly on the steering knuckle.
Mount the “ hub – disk” assembly on the steering knuckle by means of the PF 236 device.
Mount the steering knuckle nut and tighten at 23 daNm moment by means of the
MOT 50 wrench.
Mount:
- the caliper support with the screws greased with FIXAMED R 58 and new Grower
washer;
- the brake pads;
- the brake caliper;
- the wheel.
Get the vehicle down from the elevator.
Press the brake pedal several times, in order to bring the piston in contact with the brake
pads.
BRAKE DISK
vnx.su