Repair Manual

FRONT BEARING ELEMENTS
31 - 32
31
FRONT SUSPENSION SPRING
D
ISMOUNTING
Dismount the shock absorber and the spring by means of the SUS 478 device.
Clamp the SUS 480 device into t he vice.
Place t he “ SUS 478 device – spring “
assembly on the SUS 480 device.
Place the upper plate and press the spring
until the SUS 478 device is released.
Dismount the SUS 478 device.
Depress the spring and remove it.
R
EMOUNTING
NOTE:
The lower end of the spring must be in contact with the plate and aligned with
the SUS 478 device support slot.
Dismount the SUS 480 device.
Mount the “ device – spring – shock absorber” assembly.
Place the new s pring on the SUS 480
device.
Press the spring , observing its mounting po-
sition.
Mount the SUS 478 device (the grippers shall
be hooked on the last but one upper coil).
vnx.su