Repair Manual

33
REAR BEARING ELEMENTS
33 - 3
PLATE DRIVE REAR AXLE
Detach the brake cable from the hand brake levers.
Disconnect the flexible connecting hose of the braking hydraulic circuit from the
three ways connection.
Remove the rear axle, place it on a support and drain the oil, by dismounting both the
empty plug and the level one, to speed draining.
R
EMOUNTING
Perform the same operation in reverse order; attention should be paid to the fact that
the axle may overturn when lifting it to mount the clips.
NOTE:
The steps performed when dismounting , remounting the rear axle ( as assembly )
are
similar for all types of pick-ups.
Dismount :
- the four screws of the cardanic flange at the side towards the differential gear;
- the shaft nut that attaches the shock absorber;
- the clamping clips of the half-elliptic spring.
vnx.su