Repair Manual

REAR BEARING ELEMENTS
33
33 - 12
PLATE DRIVE REAR AXLE DIFFERENTIAL
Remove the differential assembly by unscrew the eight screws of the casing.
Dismount :
- the screws that attach the differential nuts lock washers (1);
- the differential adjustment nuts (2);
- the stub bolts nuts that attach the bearings half casings (3);
Remove the centering bushing and unscrew the stub bolts.
Together with the conical balls bearings, remove the differential assembly, detaching it
from the front part of the drive pinion.
Remove the differential drive pinion together with the conical balls bearing from the
differential casing.
Dismount two rim attachment screws, on opposite sides.
Depress the bearings by means of the CV 28 A extractor, provided with CV 48 claws.
Dismount the rim ; do not reuse the screws.
vnx.su