Repair Manual

33
REAR BEARING ELEMENTS
33 - 21
NON DRIVE PLATE REAR AXLE
WHEEL HUB
D
ISMOUNTING
NOTE: It is assumed that the axle is dismounted and fixed on the support.
Dismount the wheel.
Unscrew the M8 sunk screw.
Unscrew the four M 10 screws attaching the bi-conical bearing casing to the axle end.
Remove the hub – bearing casing assembly.
Dismount:
- the slotted nut and the spacer which attach the bearing casing on the inner part;
- the inside safety ring.
Depress the hub from the bearing casing by means of the PS 65 device.
R
EMOUNTING
Perform the dismounting operations in the reverse order.
The tightening moments have the same values as those for the hub of the drive plate axle.
vnx.su