Repair Manual

REAR BEARING ELEMENTS
33
33 - 24
CAST IRON REAR DRIVE AXLE
REAR DRIVE AXLE OF CAST IRON
DACIA 1304, 1307 ( supplier ARO CÂMPULUNG )
CHARACTERISTICS
It is a rigid type cast iron axle, with differential and propeller shafts.
It is attached to the chassis by means of the half-elliptical springs and the hydraulic shock
absorbers.
The main transmission is simple type , with hypoid gearing between the pinion and the rim.
The differential is symmetrical, simple, with two differential conical pinions.
IMPORTANT !
The interchangeability of the cast drive axle with the pipe axle ( assembled axle ) is
depenedent of the replacement of the shock absorbers, springs attachment plates,
attachment clips from the springs and shock absorbers buffers.
NOTE:
The dismounting – remounting steps of the cast drive axle ( as an assembly ) are
the same as the ones for the drive axle made of plate, previously presented.
vnx.su