Repair Manual

REAR BEARING ELEMENTS
33
33 - 26
CAST IRON REAR DRIVE AXLE
T
IGHTENING MOMENTS
- Screws assembling the propeller shaft flange................2,5 daN.m
- The sunk screw ..................................................0,8 +/- 0,3 daN.m
- The rear wheel stud bolt nut.............................................7 daN.m
THE DIFFERENTIAL OF THE REAR DRIVE AXLE CAST IRON
The rear axle assembly is dismounted from the vehicle, placed on an universal support; having
its propeller shafts dismounted.
DIFFERENTIAL DISMOUNTING
On side of cardanic flange, dismount :
- the nut retainer;
- the nut retainer;
- the cardanic flange;
- the sealing ring (annular oil sealing ring) 42 x 72 x 12;
- the oil deflector;
- the bearing (the inner ring with conical balls) 30 x 72 x 28,75;
- the adjustment washer;
- the differential drive pinion washer.
vnx.su