Repair Manual

36
STEERING ASSEMBLY
REPLACEMENT OF THE NOISE ABSORBER BEARING
D
ISMOUNTING
1. Noise absorber bearing
2. Elastic bushings
3. Inside support washer
4. Outside support washer
5. Safety ring
36 - 5
Place the car on the elevator.
Dismount the wheel on the noise absorber bearing side (right side).
Dismount:
- the steering auxiliary connecting rod;
- the protection bellows.
Rotate the steering wheel until the rack is withdrawn.
Dismount:
- the safety ring;
- the outer washer.
Remove, by means of a screw driver:
- the elastic rings;
- the worn noise absorber bearing.
NOISE ABSORBER BEARING
vnx.su