Repair Manual

STEERING ASSEMBLY
36
PUSHER ADJUSTMENT
MEASUREMENT OF THE FREE HEIGHT “ H “
OF THE ELASTIC WASHER
Place the washer on a straight plate and
measure its height by means of a comparator,
using a set of spacers with a known thickness.
Note the average value.
RACK WEAR CHECKING
The rack wear degree is established by
measuring the difference between the maximum
and minimum values on the rack, in the central
area.
Attach the comparator support instead of
the cap.
Bring the feeler in contact with the pusher.
Mark points A and B in the central area of
the rack, corresponding to the box extremity.
The measurements are always performed
from point (A) towards point (B).
Bring the rack to point (A) and set the
comparator to zero.
Slowly move the rack until it reaches point
(B).
Bring the rack back to point (A).
36 - 8
vnx.su