Repair Manual

36
STEERING ASSEMBLY
PUSHER ADJUSTMENT
A
DJUSTMENT EXAMPLE
The distance between the pusher and the adjustment washers: D = 1,48 mm
Free height of the elastic washer: H = 1,32 mm
Thickness of the adjustment spacer: E = ( D + 0,06 ) - H = ( 1,48 + 0,06 ) - 1,32
E = 0,22 mm
P
ARTICULAR CASE
It may happen that value found for the adjustment washers thickness is negative.
EXAMPLE
The distance between the pusher and the adjustment washers : D = 1,17 mm
Free height of the elastic washer: H = 1,35 mm
Thickness of the adjustment spacer: E = ( D + 0,06 ) - H = ( 1,17 + 0,06 ) - 1,35
E = - 0,12 mm
In this case, take out a 0,15mm thick washer from the washers set, after which perform
measurement again to establish the thickness of the adjustment washers.
36 - 11
vnx.su