Repair Manual

MECHANICAL ELEMENTS CONTROLS

DISMOUNTING

Drain the liquid out of the reservoir.

Detach the four brake ducts from the pump.

Disconnect the electri cal contact from ICP

transducer.

Dismount the central pump from the

servobrake.

Disconnect the suction hose of the

servobrake.

Dismount :

- the connecting fork shaft to brake

pedal (1);

- the attachment nuts of the servobrake

on the iron plate.

Dismount the servobrake.

EMOUNTING

Before remounting, check:

- the adjustment of the main cylinder stroke, which is obtained by acting on the

pushing rod (P) nut in order to obtain value X = 9mm,between the pushing rod end and the

rest surface of the main cylinder;

- the adjustment in order to obtain the value L = 131 mm is performed by screwing or

unscrewing the fork C, followed by blocking the lock nut E.

For remounting, perform the dismounting operations in the reverse order.

Purge the brake circuit.

SERVOBRAKE

37 - 6

vnx.su