Repair Manual

MECHANICAL ELEMENTS CONTROLS
37
HAND BRAKE SECONDARY CABLE REPLACEMENT
D
ISMOUNTING
Disconnect the battery.
Release the primary cable from the rocking joint.
Dismount the drums.
Lift the motor-car by means of a jack.
Unscrew the nuts M and N.
Release the secondary cable from the control levers.
Dismount the sheathes stops (from the plate and from the floor).
Dismount the secondary cable.
R
EMOUNTING
Position the secondary cable.
Connect the secondary cable in:
-the floor;
-the sheaths stops from the plate;
-the sheaths stops floor.
Adjust the hand brake.
Tighten to the required moment the nut N.
HANDBRAKE PRIMARY AND SECONDARY CABLE
37 - 12
M
N
vnx.su