Repair Manual

MECHANICAL ELEMENTS CONTROLS
37
BRAKE LIMITER
After obtaining the pressure of 20
bars, with the brake pedal pressed, slide the
passing fork (3) until the contact with the limiter control lever.
In this moment block the passing fork by means of the screw (1) and the nut (2).
Release the brake pedal and purge the braking circuit.
Dismount the manometer and the adjustment is considered ready.
OBSERVATION!
If, with the limiter being mounted, the pressure of 20 bars can not be obtained,
proceed to the limiter replacement.
Repairing of the limiter is forbidden !
+ 0
- 2
+ 0
- 2
37 - 14
O
1
O2 O
vnx.su