Repair Manual

38
ELECTROVACUUMATIC CONTROL SYSTEM
4X4 COUPLING
DISMOUNTING
Suspend the vehicle on an elevator.
Disconnect the vacuum capsule connector.
Disconnect the vacuum hoses from the capsule.
Dismount the lock pin and remove the bolt which is connecting the capsule axle with
the GB control lever.
Dismount the capsule attachment nuts on the support.
38 - 5
VACUUM CAPSULE
R
EMOUNTING
Perform the dismounting operations in reverse order.
NOTE:
Observe the connecting position of the hoses to the capsule, from corresponding
electric valves. After capsule replacement, perform the electrovacuumatic control
adjustment.
vnx.su