Repair Manual

40
GENERAL
40 - 15
BODY CHECKING / STRAIGHTENING BENCH
TYPE CELETTE
To straighten the vehicle body, CELETTE bench is provided with a traction arm of 10
tons, Caiman type, 250 mm stroke of the hydraulic cylinder, with rapid anchorage on any
side of the mobile bench ( fig. 2 ) stands is.
2. CROSS BAR MODULAR SET CAR 502 )
CELETTE bench has in its composition, five modular cross bars ( fig.3 ), as follows:
- two front cross bars A and B ( T shaped ) there are always ready in the same
position (towards front of bench) – fig. 4.
- two straight cross bars C1 and C2 and one D cross bar ( U-shaped ) which may be
placed in different positions subject to vehicle type.
The marked figures ( 14……36 ) are engraved on the mobile bench, every mounting
being supplied with a drawing indicating the exact position of the modular cross bars
subject to vehicle type.
( fig.3 ) ( fig.4 )
( fig.2)
one.... two... and tree !
A
B
C
2
C
1
D
A
B
vnx.su