Repair Manual

40
GENERAL
40 - 19
BODY CHECKING / STRAIGHTENING BENCH
TYPE CELETTE
Supports (7) and (8) are used in front
straightening. They enable the positioning
and centering of the upper longitudinal
girders- ( fig. 16 ).
( fig. 16 )
Front suspension upper arm supports fixing
Supports (27) and (28) are used for
centering and alignment of the front
longitudinal girders. They are to be used
for any reparation cases because they are a
main reference of vehicle setting on the
bench.
( fig. 17 )
( fig. 17 )
Centering under front longitudinal girder
Supports (29),(30) and (31) are used
mainly in rear strengthening for position-
ing and centering the rear unit or the rear
longitudinal girders. In the same time, they
may also be used for vehicle alignment in
the front straightening when vehicle front
part is replaced.
( fig. 18 )
( fig. 19 )
Rear spring front supports fixing
Supports ( 32 ),(33 ) and ( 34 ) are used
mainly in rear s trengthening for positioning
the rear unit or the rear longitudinal girders.
In the same time, they may also be used
for vehicle alignment in the front straight-
ening when vehicle front part is replaced
( fig. 19 ).
( fig. 18 )
Rear spring front supports fixing
31
29 30
7
8
34
32
33
vnx.su