Repair Manual

UPPER FRONT STRUCTURE
42
42 - 4
HEAD LAMP SUPPORT
DISMOUNTING
Dismount the elements, which are in contact with
the headlamp support.
Detach the welding points of the head lamp (1)
support which are in connection with :
-the radiator upper cross member in the area
(3);
-the reinforcement in the area (4);
-the lower part of the front wing lining in the
area (5);
-the front wing lining in the lateral part in the
(6) area.
Straighten the areas resulted by dismounting.
Grind the areas resulted by dismounting.
REMOUNTING
Position and center the new element.
Check the correct positioning of the head lamp
support.
Weld the headlamp support (1) following the
assembling outliners 2,3,4,5,6.
Protect the welding with a corrosion-preventing
product.
Mount the elements, which are connections with
the headlamp support.
1
2
3
4 5 6
vnx.su