Repair Manual

DISMOUNTING
Dismount the elements which are in
contact with the front pillar lining.
Detach the welding points of the front
pillar lining (1) which are in connection
with:
- front pillar in the area (4) and (5);
-floor closing plate in the area (8);
-windscreen lower cross bar in the
area (9);
- front wing lining upper edge in the
area (10);
- climate control box end in the area
(11);
-iron plate in the area (12).
Straighten the areas resulted by
dismounting.
Grind the areas resulted by dismounting.
R
EMOUNTING
Position and center the new element.
Check the correct positioning of the
front pillar lining.
Weld the front pillar lining (1) following
the assembling outliners 4,5,8,9,10,11,12.
Protect the new element with a corrosion
preventing and noise absorbent product.
43 - 1
43
UPPER SIDE STRUCTURE
FRONT PILLAR LINING
7
11
10
8 3
4
12
vnx.su