Repair Manual

UPPER SIDE STRUCTURE
43
43 - 2
FRONT PILLAR
D
ISMOUNTING
Dismount the elements which are in contact with
the front pillar .
Detach the welding points of the front pillar (2)
which are in connection with :
-lateral frame in the areas (3);
- front pillar lining in area (4) and (5);
- upper spacer and the lower windscreen
lining in the areas (6), and (7).
Straighten the areas resulted by dismounting.
Grind the areas resulted by dismounting.
REMOUNTING
Position and center the new element .
Check the correct positioning of the front pillar.
Weld the front pillar (2) following the assembling
outliners 3, 4,5,6,7.
Protect the new element with a corrosion preventing
and noise absorbent product
9
6
5
vnx.su