Repair Manual

44
REAR UPPER STRUCTURE
DISMOUNTING
Dismount the elements which are in
contact with the side panel.
Detach the welding points of the side
panel (1) which are in connection with:
- middle pillar in the area (2);
-floor side plate and front extensor
lower edge in the (3) area;
- the rear side plate and rear extensor
lower edge in the area (4);
- the platform floor in the area (5);
- the cabin side plate in the area (6).
Straighten the areas resulted by
dismounting.
Grind the areas resulted by dismounting.
R
EMOUNTING
Apply a layer of 5322 material on the
joints areas (7) of the side panel with: front
/ rear extensor, lower panel, side plate, rear
side floor cabin, rear plate.
Position and center the new element.
Check the correct positioning of the side
panel .
Weld the lateral panel (1) following the
assembling outliners 2,3,4,5,6.
Apply a sealant material layer
PLASTISOL 4 in the joint area (8) of
the side panel with : rear side floor, rear
lamp lining, front/rear extensor, wheel pas-
sage, cabin separating wall.
SIDE PANEL DACIA 1304 PICK - UP, 1307
44 - 1
1
6 5
2
3
4
7
Rear plate
8
vnx.su