Repair Manual

REAR UPPER STRUCTURE
44
DISMOUNTING
Dismount the elements which are in contact
with the rear plate.
Detach the welding points of the rear
plate (1) which are in connection with:
- platform floor rear edge in area (2);
- corner plate edge in the area (3).
Straighten the areas resulted from
dismounting.
Grind the areas resulted from dismounting.
R
EMOUNTNG
Position and center the new element.
Check the correct positioning of the rear
plate.
Apply a secured stripping in the joint
area
(4) of the rear plate with the rear extreme crossbar.
Weld the rear plate (1) following the
outliners (2) and (3).
Protect the welding with a corrosion
preventive product.
REAR PLATE
44 - 4
1
2
3
4
vnx.su