Repair Manual

AIR CONDITIONING
62
62 - 11
Evaporator has the purpose to transfer to the refrigerant liquid the air heat, which is passing
through it.
The cooled air, is so conveyed in the passengers compartment, progressively reducing the
temperature. The refrigerant fluid which goes into the evaporator, absorbs the passengers
compartment heat, cycled transmitted by the GMV-AC at constant temperature and is trans-
forming it from liquid into vapors.
At the inlet refrigerant is liquid at the outlet in G.M.V. – AC it has changes into gas.
The evaporator consists of a package with slotted aluminum plates, separated by an empty
“U- shape” space, where the refrigerant fluid flow is pushed.
The evaporator is mounted on the iron plate, in the right side, under the dashboard, right side,
under the dashboard.
D
ISMO UNTING
Disconnect the battery.
Drain the refrigerant circuit
Dismounting the dashboard.
Remove anti-condense sealing material.
Disconnect the pipes evaporator – compressor and evaporator – tank filter.
Disconnect the connector of the evaporator GMV.
Dismount the thermostatic expansion valve.
Disconnect the air flow pipes.
Dismount the front attachment nuts ( 1) and (2) of the evaporator unit.
Dismount the evaporator attachment screw (3) on the right front pillar.
Dismount the evaporator.
EVAPORATOR
vnx.su