Repair Manual

INSTRUMENT PANEL
83
83 - 14
NOTE:
The oil pressure switch may not be repaired. It is placed on the left side of the engine
block.
To check the oil pressure switch, the
following items are required:
-a compressed air source;
-a 0 – 1 bars manometer;
-a control lamp.
Make an assembly according to the
diagram. When the air is off, the control lamp
should be lighted. If the lamp does not light,
replace the oil pressure s witch.
When the air is open and the pressure is
over 0,35 +/- 0,08 bars, the control lamp
should go off.
If the lamp does not go off at all, or does
not go off at the required pressure, replace
the oil pressure switch.
OIL PRESSURE SWITCH CHECKING
vnx.su