Repair Manual

CONTROLS - SIGNALLING
84
DISMOUNTING
Disconnect the battery
Dismount the half steering wheel housings.
Disconnects the connecting plugs of the
contact switch.
Bring the key in G position.
Unscrew the attachment screw (1).
Press the mobile pin (2) and draw the
contact backwards.
R
EMOUNTING
Mount the contact in its seat.
Tighten the attachment screw (1).
Connect:
- the contact switch;
- the battery.
Check the contact switch operation.
Mount the steering wheel housings and
the contact switch cover.
CONNECTING PLUGS REPLACEMENT
The operations are to be performed after dismounting the contact switch from the vehicle.
D
ISMOUNTING
Dismount the attachment screws of the
blocking wedge guiding.
Dismount the connecting plugs.
R
EMOUNTING
Position and mount the connecting plugs.
Mount the blocking wedge guiding.
Tighten the attachment screws of the
blocking wedge guiding.
84 - 2
STARTING - IGNITION SWITCH
vnx.su