Repair Manual

CONTROLS - SIGNALLING
84
TURN SIGNALING SWITCH
DISMOUNTING
Disconnect the battery.
Dismount the lower housing of the steering wheel.
Cut the plastic ring.
Disconnect the connecting coupling to the front wiring.
Unscrew the connecting screws of the signaling switch off the steering wheel column.
Remove the switch.
R
EMOUNTING
Mount the switch.
Tighten the switch attachment screws.
Connect the connecting coupling to the front wiring.
Position and tie the wire bundle with a new plastic ring.
Connect the battery.
Check the operation of the signaling switch.
Mount the lower half casing of the steering wheel.
84 - 4
UNDER WHEEL CONTROL MODULE
vnx.su