Repair Manual

10
10 - 35
ENGINE AND LOWER ENGINE UNITS
Compress the spring by means of the MOT 382 and mount the lock half cotters.
Mount the tilters shaft.
Mount the tilters c ap.
The nuts tihtening moment is : 0,5 - 0,7 daNm.
Mount the acceleration cable and adjust the acceleration pedal stroke.
Dismount the valve maintainin device MOT 61 and mount the spark plug.
Check and adjust the engine (ignition,carburation).
TILT ERS PLATFORM ( on car )
D
ISMOUNTING
Disconnect the acceleration cable.
Dismount the tilters cap.
Dismount the platform from the cylinder head.
Dismount the lock clip from the shaft head.
ATTENTION:
Upon distension of springs,the parts
should not spring from the shaft.
Dismount the parts from the shaft and place
them in order.
Wash the parts observing the dismounting order.
Check the parts and replace the deffective ones.
DISMOUNTING – MOUNTING
vnx.su