Repair Manual

10 - 36

ENGINE AND LOWER ENGINE UNITS

REMOUNTING

Lubricate the supports,the tilters and the shaft

with clean oil.

Mount the parts on the shaft in the reverse

order of the operation performed for

dismounting.Pay attention that attachment holes

in the supports identify with the sockets on the

shaft.

Mount the assembled shaft on the cylinder

head and tighten it at the moment of

1,5 - 1,7 daNm . Adjust the tilters.

VA LVES GUIDES REPLACEMENT

ISMO UNTING

Dismount the cylinder head from the

engine.

Dismount from the cylinder head the followings:

- the water pump;

- the valves;

- the valves shafts sealing rings;

- the tilters platform;

- the attachment bolts of the cap;

- the spark plugs.

Place the cylinder head on the

MOT 121 support plate and by means of the

MOT 148 device chuck (1) depress the

guiding on a hydraulic press.

Mount the tilters cover.

Mount the acceleration cable and adjust the acceleration pedal stroke.

Check and adjust the engine(ignition,carburation)

NOTE:

Check the tihtening at the required moment of the tilters platform attachement nuts

and screws after every 10 000 km of driving before tilters adjustment.

DISMOUNTING - MOUNTING

vnx.su