Repair Manual

10
10 - 47
ENGINE AND LOWER ENGINE UNITS
Mount the annular oil seal in its place,slightly
tapping the chuck head until it comes into contact
with the crankshaft.
The mounting chuck for the annular oil seal
shall be kept with care in order to avoid
deterioration of the collar on which the
annular oil seal is placed.
Protect t he chuck by placing a worn annular
oil seal on it.
Mount the flywheel.the screws will be
lubricated w ith FIXAMED M 28.
Tighten the screws at a 5 daNm moment.
Center the disk by means of the centering chuck and mount the clutch mechanism.
Mount the gear box.
Check all the fluid fillings and perform all necessary adjustments.
REPLACEMENT OF THE CLUTCH SHAFT CENTERING BUSHING
D
ISMO UNTING
Disconnect the battery
Dismount:
- gear box;
- clutch mechanism and the disk;
- the worn bushing by means of the
MOT 101 extractor.
DISMOUNTING – MOUNTING
vnx.su