Repair Manual

10
10 - 49
ENGINE AND LOWER ENGINE UNITS
Place the e ngine on the MOT 460
suPlace the engine on the MOT 460
support.pport.
Dismount:
- the pressure plate and the clutch disk;
- the breaker-distributtor pinion by means
of a M 12 x 1,5 screw.
Rotate the engine by 180 º and dismount the
following parts:
- the crankshaft pulley;
- the oil casing;
- the oil pump;
- the distribution cap.
Take out the sealing gaskets of the dismounted
items or remove the sealant material by scrappimg
it, for those with sealant sealing.
Dismount the distribution chain tightening
device.
Strain the lock washer and unscrew the cam-
shaft pinion fixing screw.
Take out the camshaft pinion and the
distribution chain.
DISMOUNTING – MOUNTING
vnx.su