Repair Manual

10
10 - 60
ENGINE AND LOWER ENGINE UNITS
Place the new chain on the camshaft pinion
and on the crankshaft pinion.
Mount the camshaft pinion maintaining the
alignement of the markings on the pinions.
Tighten the fixing screw at a 2 daNm
moment and strain the safety washer.
Mount the tightener performing the
dismounting operations in the reverse order:
1.Tightener crosshead shoe.
2. Spring
3. Shaft
4. Tightening washer
5. Fixing screw and washer
Remount:
- the distribution cap and the oil sump with new gaskets; (using sealant material for engines
using this sealing with sealing material);
- the crankshaft pulley; (the surface between the pulley hub and the distribution pinion will
be greased with LOCTITE 518);
- the water pump pulley and the fan;
- the elastic bushings fixing attachments nuts of the stabilizer rod;
- the crossbar between the longitudinal girders;
- the engine shield.
Mount the alternator belt and adjust its tighteness.
Mount the radiator.
Perform : - oil filling of the engine;
- filling and aeration of the cooling circuit.
TIGHTENER AND DISTRIBUTION CHAIN
vnx.su