User Manual

English 25
Operations
08 Deodorizer Reset (3 sec)
Deodorizer Reset
After about 18 months of using the original deodorizer lter, the
lter indicator blinks red to remind you that the lter needs to
be replaced. When this happens, replace the lter, and then press
and hold Deodorizer Reset for 3 seconds. The lter lifecycle will
be reset and the lter indicator turns off.
09 Door Alarm / °C  °F (3 sec)
Door Alarm
You can enable or disable the door alarm by pressing Door Alarm.
When Door Alarm is enabled and a door is left open for more than
2 minutes, the alarm will sound and the alarm indicator will blink.
The Door Alarm function is enabled by factory default.
°C  °F
You can use the Door Alarm button to switch the temperature
scale between Celsius and Fahrenheit.
To switch the temperature scale, press and hold Door Alarm for
3 seconds.
10 Override (3 sec)
Override
The Override function activates/deactivates Smart Grid.
Press and hold Override for 3 seconds to set/clear the Override
function.
Dacor_T-TYPE_BRF9000M_DA68-03574F-00_EN.indd 25 2017-09-20  6:32:20