Installation Manual

English 15
Installation requirements
If codes permit and a separate ground wire is used, a qualified electrical installer should
confirm that the ground path and wire gauge comply with local codes. Check with a
qualified electrical installer if you are unsure the oven is properly grounded.
The oven must be connected to a grounded-metal, permanent wiring system.
Ensure the electrical connection and wire size are adequate and comply with the
National Electrical Code, ANSI/NFPA 70-latest edition or CSA Standards C22.
1-94, Canadian Electrical Code, Part 1 and C22.2 No. O-M91-latest edition, and all local
codes. A copy of these code standards can be obtained from:
• National Fire Protection Association
1 Batterymarch Park
Quincy, MA 02169-7471
• CSA International
8501 East Pleasant Valley Road
Cleveland, OH 44131-5575