Installation Instructions

Microwave Trim Kit Instructions
Page 2
For proper fit, the cutout dimensions
shown are required. The spacing above
and below the cutout are critical for
ventilation purposes. Failure to provide
proper ventilation will result in possible
damage to the microwave.
Introduction
Tools Required
Phillips head
screwdriver
Flat blade
screwdriver
PencilTape measure
Drill with 3/32” drill bit
(for drilling pilot holes)
16 3/4” ±
1
/16
(42.5 cm)
1” min.
(2.5 cm)
both sides
25 3/4” ±
1
/8
(65.4 cm)
5/8” min.
(1.6 cm)
5/8” min.
(1.6 cm)
Minimum interior
cabinet depth: 20” min.
(50.8 cm)