Installation Instructions
Table Of Contents
- Dacor_FDR_BRF8000M_IM_DA68-03621A-04_EN
- Before you begin...
- Customer-Service Information
- Important Safety Instructions
- Safety and warning information
- Installation Specifications
- Product Specifications
- Installation
- Installation requirements
- Installation instructions
- 1. Uncrating the Refrigerator
- 2. Moving the Refrigerator
- 3. Installation preparation
- 4. Attaching the anti-tip-bracket
- 5. Remove Upper Door Cover, Kickplate
- 6. Attaching the Refrigerator’s Top Cover
- 7. Moving the Refrigerator Into Its Enclosure
- 8. Leveling the Refrigerator
- 9. Securing the Refrigerator
- 10. Attaching Panel brackets
- 11. Hanging a Custom Panel
- 12. Aligning the Panel
- 13. Attaching the Door’s Interior Covers
- 14. Connecting the Water Line
- 15. Attaching kickplate and Toe kickplate
- 16. Attaching the Refrigerator Trim
- 17. Attaching Trim Top Cover
- 18. Removing the Interior packaging
- 19. Adjusting the door spring
- 20. Adjusting the door Opening Angle
- 21. Cleaning
- 22. Installation Checklist
- Dacor_FDR_BRF8000M_IM_DA68-03621A-04_MES
- Antes de comenzar...
- Información de Atención al cliente
- Instrucciones importantes de seguridad
- Información de seguridad y advertencias
- Especificaciones de instalación
- Especificaciones del producto
- Instalación
- Requisitos de instalación
- Instrucciones de instalación
- 1. Desembalar el refrigerador
- 2. Desplazar el refrigerador
- 3. Preparación para la instalación
- 4. Colocar el soporte antivuelco
- 5. Retirar la cubierta superior de la puerta, placa de protección
- 6. Colocación de la tapa superior del refrigerador
- 7. Colocar el refrigerador en su estructura
- 8. Nivelar del refrigerador
- 9. Ajuste del refrigerador
- 10. Ajuste de los soportes del panel
- 11. Colgar un panel personalizado
- 12. Alinear el panel
- 13. Colocar las cubiertas interiores de la puerta
- 14. Conectar la tubería de agua
- 15. Colocar la placa de protección y el zócalo
- 16. Colocar el borde del refrigerador
- 17. Instalar el borde de la cubierta superior
- 18. Retirar el empaque interno
- 19. Ajustar el resorte de la puerta
- 20. Ajuste del ángulo de apertura de la puerta
- 21. Limpieza
- 22. Lista de verificación de instalación
- Dacor_FDR_BRF8000M_IM_DA68-03621A-04_CFR
- Avant de commencer...
- Informations relatives au service client
- Consignes importantes relatives à la sécurité
- Consignes et avertissements de sécurité
- Spécifications relatives à l'installation
- Caractéristiques techniques de l'appareil
- Installation
- Exigences relatives à l'installation
- Instructions d'installation
- 1. Déballage du réfrigérateur
- 2. Déplacement du réfrigérateur
- 3. Préparation à l'installation
- 4. Fixation du support antibasculement
- 5. Retrait du cache supérieur de la porte, plinthe
- 6. Fixer le cache supérieur du réfrigérateur
- 7. Placer le réfrigérateur dans son caisson
- 8. Mise à niveau du réfrigérateur
- 9. Fixation du réfrigérateur
- 10. Fixation des supports du panneau
- 11. Fixation d'un panneau personnalisé
- 12. Alignement du panneau
- 13. Fixation des caches intérieurs de la porte
- 14. Raccordement de la conduite d'eau
- 15. Fixation de la plinthe et de la patte
- 16. Fixation de l'habillage du réfrigérateur
- 17. Fixation du cache supérieur de l'habillage
- 18. Retrait de l'emballage intérieur
- 19. Ajustement du ressort de la porte
- 20. Ajustement de l'angle d'ouverture de la porte
- 21. Nettoyage
- 22. Liste de vérifications pour l'installation
Installation instructions
English30
Anti-tip bracket considerations
Product
Wall
Anti-Tip-Bracket
1. Bracket positioning: follow the cabinet-
specic height table.
2. Screws: Tighten all 3 screws on the
brackets.
3. Push the product up against the rear
wall of the cabinet.
4. Spacer: If using the spacer, you must
follow the positioning specications of
the bracket (see the table above).
CAUTION
• The height of the spacer must be
calculated based on the depth of the
cabinet.
• The spacer must be xed separately
from the cabinet.
When installing the product into the cabinet
Tape or Fixer
Before positioning the product in the
cabinet, plug in the power cord. Then,
attach the power cord near the front of the
cabinet opening using tape or xer such as
clip, pin, etc.
After positioning the product inside the
cabinet, make sure the power cord is
positioned on the top of the product (as
shown in the in the gure).
Dacor_FDR_BRF8000M_IM_DA68-03621A-04_EN.indd 30 2017-12-14 12:44:32