Installation Instructions

28 English
Installation instructions
Final installation checklist
WARNING
The owner shall be responsible for the cooktop's proper installation.
After installing the cooktop, the installer should review this checklist to confirm the
cooktop is properly installed and ready to operate.
• The gas line is properly connected to the cooktop.
• The gas is turned on.
• All connections were checked for leaks.
• The cooktop is properly plugged in to a grounded electrical outlet.
• The cooktop burners and grates are properly assembled.
• All burners were tested and function properly.
NOTE
Keep the serial-number label (top of the cooktop) in the user manual for easy reference.
LP (Propane) conversion instruction
WARNING
• This conversion must be performed by a qualified installer or gas supplier per
manufacturer directions and all requirements of the governing authority. Failure to
follow ALL instructions could result in serious injury and property damage. The
agency performing this work assumes responsibility for the conversion.
• Know the location of the gas shut-off valve and how to shut it off.
• Unplug or disconnect power before service.
• Do not use the cooktop with LP gas the pressure regulator and burner orifices have
not been converted for LP use. High flames and toxic fumes may cause serious injury.
• Ensure LP gas burner orifices are positioned properly during conversion. Improper
orifice placement will effect burner and cooking performance and could result in
personal injury and product damage.
All Dacor gas cooktops are manufactured to use natural gas. The cooktops ship with LP
Conversion Kits. The kit contains a set of burner orifices corresponding to the cooktop
burners. The orifices are packed in cardboard and placed in a plastic bag. The bag is
packaged with a user manual. The orifice in the pressure regulator is a dual-purpose
orifice (one side for natural gas, the other for LP gas.)