user manual

7
Installation Instructions
Unpack the Cooktop
WARNING
If the gas and electric service provided does not •
meet the product specifications, do not proceed with
the installation. Call the dealer, the gas supplier or a
licensed electrician.
The cooktop is heavy. A minimum of two people are •
required to safely install it.
Unpack the parts box and verify that all required compo-
nents have been provided. If any item is missing or dam-
aged, please contact your dealer immediately. Do not install
a damaged or incomplete appliance. The customer must
report cosmetic issues within 30 days of installation.
Knobs (see table below)•
Grates (see table below)•
Standard burner caps (see table below)•
Standard burner rings (see table below)•
SimmerSear™ inner burner caps (see table below)•
SimmerSear outer burner caps (see table below)•
SimmerSear burner rings (see table below)•
Hold down bolts/washers (2 sets)•
Regulator•
Dacor Stainless Steel Cleaner•
Igniter cleaning brush•
Literature kit•
INCLUDED GRATES AND BURNER PARTS
Part
Quantity
for Model
DRT304S
Quantity
for Model
DRT366S
Knobs, standards 3 4
Knobs, SimmerSear 1 2
10 inch grate none 1
12 inch grate none 2
14 inch grate 2 none
Standard burner cap, small 1 2
Standard burner ring, small 1 2
Standard burner cap, large 2 2
Standard burner ring, large 2 2
SimmerSear burner ring 1 2
SimmerSear
inner burner cap
1 2
SimmerSear
outer burner cap
1 2
Cooktop Installation
WARNING
To prevent damage to the gas pressure regulator, •
install it only after the cooktop is mounted in its per-
manent position.
Do not over-tighten the hold down bolts. Over tight-•
ening the hold down bolts may result in improper
operation of the dual gas burners.
IMPORTANT
Do not use a hardening compound or caulk to
permanently seal the cooktop into place. The cooktop
must be readily removable if service is required. Removal
of sealant to service the unit will be performed at the
customer’s expense.
Lower the cooktop into the cutout while feeding the 1.
electrical cord into the utility cutout. Center the cooktop
in the cutout.
Secure the cooktop to the countertop using the two (2) 2.
provided hold-down bolts and washers provided. Do
not overtighten the bolts.