User's Manual

E7
Before operating your new Microwave In-A-Drawer
™
make
sure you read and understand this operation manual
completely.
Before the Microwave In-A-Drawer•
™
can be used,
follow these steps:
Plug in the Microwave In-A-Drawer1.
™
.
ENJOY YOUR
MICRO-
WAVE TOUCH CLEAR AND TOUCH
CLOCK
will appear.
Touch the 2. STOP/CLEAR pad.
:
will appear.
Set clock.3.
To Set The Clock
Touch the 1. TIMER/CLOCK pad and number 2 .
Touch the number pads for correct time of day and 2.
touch the TIMER/CLOCK pad again.
This is a 12 hour clock. If you attempt to enter an incorrect
clock time,
ERROR
will appear in the display. Touch the
STOP/CLEAR pad and re-enter the time.
If the electrical power supply to your Microwave •
In-A-Drawer
™
should be interrupted, the display will
intermittently show
ENJOY YOUR
MICRO-
WAVE
TOUCH CLEAR
AND TOUCH CLOCK
after the
power is reinstated. If this occurs during cooking, the
program will be erased. The time of day will also be
erased. Simply touch the STOP/CLEAR pad and reset
the clock for the correct time of day.
NOTE:
The Microwave In-A-Drawer•
™
can be programmed with
the drawer open except for START/EASY MINUTE.
Before Operating
Timer
Touch the 1. TIMER/CLOCK pad and number 1 .
Enter time.2.
Touch the 3. TIMER/CLOCK pad again.
To cancel timer, touch the4. STOP/CLEAR.
Stop/Clear
Touch the STOP/CLEAR pad to:
Erase if you make a mistake during programming.1.
Cancel timer.2.
Stop the Microwave In-A-Drawer3.
™
temporarily during
timed cooking.
Return the time of day to the display.4.
Cancel a program during cooking, touch twice for 5.
timed cooking.
Open Or Close Drawer
Always press the OPEN or CLOSE pad on the control
panel to open or close the Drawer.
Do not push or pull the Drawer by hand, except in case of
emergency, such as a power failure. If necessary, push or
pull slowly.