Specifications

6
Stiffener
Cabinet face
Countertop
Floor
3/8” min. (1.0 cm) space
behind downdraft vent
chassis to clear stiffener
3/8” min. (1.0 cm)
flat countertop overhang
required behind cutout
ERVxx15 downdraft vent.
Check downdraft vent
dimensions/specifications
to determine proper fit
DCT Series cooktop
Side View - DCT Series Cooktop with Approved Downdraft Vent
4 1/4” (10.8 cm) min.
from mounting surface to
combustibles below
cooktop chassis
E
F
C
D
Minimum distance to combustible side
wall above countertop (both sides)
F
Vertical
combustible
surface
Rear
wall
1 5/8” min.
(4.1 cm)
Countertop Cutout Dimensions
Installation Type
(C) Minimum (D) (E) (F) Minimum
DCT305 with no downdraft vent 3 1/4” (8.3 cm) 19 5/8” (49.9 cm) 27 5/8” (70.2 cm)
6 7/8” (17.5 cm)
DCT305 with ERV3015 downdraft vent 3/8” (1.0 cm) 22 3/4” (57.8 cm) 27 5/8” (70.2 cm)
DCT365 with no downdraft vent 3 1/4” (8.3 cm) 19 5/8” (49.9 cm) 33 5/8” (85.4 cm)
DCT365 with ERV3615 downdraft vent 3/8” (1.0 cm) 22 3/4” (57.8 cm) 33 5/8” (85.4 cm)
Installation Specifications
Cutout Dimensions
All tolerances +1/16” -0 (+1.6 mm, 0) unless otherwise noted.