Installation manual
CABINET REQUIREMENTS
G
WALL COVERING CABINETS,
AND COUNTERTOP MUST
WITHSTAND HEAT UP TO 200°F (93°C)
INST 023-2
Fiaure 3. Cabinet dimensions and reauirements
CUTOUT
A B C D E F G
WIDTH
30" (76.2cm)
36" (91.4 cm)
28-11/16"
(72.9 cm) to
28 15/16"
(73.5 cm)
34-1/16"
(86,5 cm) to
34-5/16"
(87.2 cm)
i 19-1/4"
I(49.0 cm) to
i 19-9/16"
(49.7 cm)
i 19-1/4"
(49.0 cm) to
i 19-9/16"
i(49.7 cm)
130"
(76.2 cm) min
36"
(91.4 cm) min
18" (45.7 cm)
min height from
countertop to
nearest cabinet
on either side
of unit
30" (76.2 cm)
min. (see note*)
clearance from
countertop to
unprotected
overhead
surface
2" (5 cm) min
clearance from
cutout to side
wall on the left
and right of the
unit
13" (33 cm)
depth of
unprotected
overhead
cabinets
IMPORTANT
Under the cooktop it is necessary to install a
partition, spaced from the bottom of the appliance
as shown in figure 2-3.
* NOTE
24" (61 cm) min. clearance if bottom of wood or metal cabinets is protected
by not less than 1/4" (0.6 cm) flame retardant millboard covered with no less
than No. 28 MSG sheet steel 0.015" (0.04 cm)stainless steel, or 0.024"
(0.06 cm) aluminum or 0.020" (0.05cm) copper. 30"(76.2 cm) min. clearance
between top of cooking platform and bottom of unprotected wood or metal
cabinet
_mportant Preparation Suggestions
1. Chamfer all exposed edges of decorative laminate
to prevent damage from chipping.
2. Radius corners of cutout and file to Insure
smooth edges and prevent corner cracking.
Recommend 1/4"or 3/8"diameter drill in each
corner.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking
of the countertop laminate.
4. This cooktop is not compatible with a raised vent.
This cooktop has been designed with wide
tolerances of cut-out to cover possible
replacement with other brands. We recommend to
that you consider the minimum dimension of cut-
out size in the case of new Installation.
Some cutout sizes for possible replacements:
Dim .
, 30"
, 36"
Inches cm
28-15/16" x 19-9/16" 73,5 x 49,7
34-5/16" x 19-9/16" 87,2 x 49,7